FD front Lower control arm length
#1
Newbie
Thread Starter
Join Date: Oct 2006
Location: Sydney
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
FD front Lower control arm length
Hi,
Measuring up the differences for FC and FD front suspension for a race car build.
Can anyone help me with the length of FD lower control arms. The measurement im after is (starting on the inside of the car) from the center of the bolt hole that holds wishbone to cross member to the center of the ball joint attached to the wheel hub.
Approx and exact figures are all helpful at this point!
Measuring up the differences for FC and FD front suspension for a race car build.
Can anyone help me with the length of FD lower control arms. The measurement im after is (starting on the inside of the car) from the center of the bolt hole that holds wishbone to cross member to the center of the ball joint attached to the wheel hub.
Approx and exact figures are all helpful at this point!
#2
Rotary Freak
Front lower pivot to balljoint 300mm. Lower wishbone attaches to a subframe, not the cross member like earlier models....and the FC too by the sounds??
Thread
Thread Starter
Forum
Replies
Last Post
GrossPolluter
Suspension/Wheels/Tires/Brakes
12
08-15-15 10:32 PM