fd build list
#1
its a drift thang
Thread Starter
Join Date: Dec 2007
Location: wa
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
fd build list
so i drift my car mainly but when its nice out i drive it rather than my accord. i want to put together a build that will knock out my comp on the track and streets but still be able to daily drive it when its nice out.
the motor im starting on is stock. so far i have found a 3 inch downpipe.
i want to put in a high flow cat ( http://www.rx7store.net/product_p/highflowfd3s.htm )
hks hi power cat back ( http://www.rx7store.net/product_p/hkshipower.htm )
this whole set up brand new is just under 1000
i really want a vmount but i will settle for a front mount greddy m spec
any intake set up will work im not picky on it
greddy rs bov
hyper grounding kit
apexi power fc and commander
nippondenso fuel pump
i know my suspension and other stuff very well so im just worried about the motor build. am i going to run into any problems with this set up or am i mising anything?
the motor im starting on is stock. so far i have found a 3 inch downpipe.
i want to put in a high flow cat ( http://www.rx7store.net/product_p/highflowfd3s.htm )
hks hi power cat back ( http://www.rx7store.net/product_p/hkshipower.htm )
this whole set up brand new is just under 1000
i really want a vmount but i will settle for a front mount greddy m spec
any intake set up will work im not picky on it
greddy rs bov
hyper grounding kit
apexi power fc and commander
nippondenso fuel pump
i know my suspension and other stuff very well so im just worried about the motor build. am i going to run into any problems with this set up or am i mising anything?
#2
Glug Glug Glug Burp
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 3,819
Likes: 0
Received 0 Likes
on
0 Posts
None of that has anything to do with a "motor build"...
Those mods will work fine - but you can get rid of the gounding kit; just make sure the already supplied grounds are in good working order.
Also, before you start a post about torque braces or tranny braces, go ahead and get new motor mounts.
Those mods will work fine - but you can get rid of the gounding kit; just make sure the already supplied grounds are in good working order.
Also, before you start a post about torque braces or tranny braces, go ahead and get new motor mounts.
#3
its a drift thang
Thread Starter
Join Date: Dec 2007
Location: wa
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
i know its not a motor build those are just the words i chose to use, sorry. im not trying to go over 380whp but i would like to be as close as possible. and i had plans on motor mounts and all the braces and what not. the cars going to be stripped out and caged and prepped for track battle.
by the way if any one has these parts or similar ones for sale that would speed things up a bit for me
by the way if any one has these parts or similar ones for sale that would speed things up a bit for me
Last edited by FD runs the hills; 04-19-08 at 10:01 PM. Reason: oops
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM