fc coil install.
#1
Junior Member
Thread Starter
fc coil install.
I acquired a set of fc coils and ignitos. I'm looking to install them where my cruise control use to be.
Before I start hacking up my harness. I would like to know wires do what coming off the fc coils?
Do I need to cut off the white connectors and splice into them or is there a place I can order some connectors?
Is there any other info I need to know before I start?
I have a stock ignition setup with a power fc now.
Before I start hacking up my harness. I would like to know wires do what coming off the fc coils?
Do I need to cut off the white connectors and splice into them or is there a place I can order some connectors?
Is there any other info I need to know before I start?
I have a stock ignition setup with a power fc now.
#2
Rotary Enthusiast
Why would you want to put FC coils in there?
Is there something wrong with your coils or the FD coils in general?
Maybe im just not in the know, but I for one have no idea why you would want to swap FC coils into an FD unless yours are dead and you have no other option..
Is there something wrong with your coils or the FD coils in general?
Maybe im just not in the know, but I for one have no idea why you would want to swap FC coils into an FD unless yours are dead and you have no other option..
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM