fans are running and not running
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Reykjavik
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
fans are running and not running
I´m new to FD3S but I´m learning, the club is a big big help. First of all I´ve used serch on the forum to help me understand the cooling problem in my rx7. from that I found out that the 4 blade fan was not running. So I check the wires and found that they were the problem. fixed that.....( thought I did )
Today I still have some problem, the thing is when my test drive was over the 4 blade fan was again not working and the 5 blade did not stop runnig. I waited for like 2 minutes and the took the battery off and put it back on to let it stop, I also (knock lightly) on the four relaysboxes for the fan and when I did the fan slowed down.
can I link the problem straight to bad relay?? can a bad relay make the other fan running and running and the other one not running? Or what is it?
thanks to you guys and the club
Today I still have some problem, the thing is when my test drive was over the 4 blade fan was again not working and the 5 blade did not stop runnig. I waited for like 2 minutes and the took the battery off and put it back on to let it stop, I also (knock lightly) on the four relaysboxes for the fan and when I did the fan slowed down.
can I link the problem straight to bad relay?? can a bad relay make the other fan running and running and the other one not running? Or what is it?
thanks to you guys and the club
#4
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Reykjavik
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
found out that the fan motor is not working. so I´m ordering a new one. nothing wrong with relays or wires, I got power to the last plug to the fan, so it must be the motor.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM