Factory Alarm Probs
#1
Junior Member
Thread Starter
Join Date: Jul 2002
Location: Tucson, AZ
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Factory Alarm Probs
I did a search on factory alarms and really couldn't find the answer to my question. My alarm arms when you lock the door just fine. The problem is that the damn thing will not turn off. I have tried the lock/unlock trick in the drivers door and it still keeps going. Any suggestions? Is there any easy way to disable it?
#3
There and back again
Join Date: Feb 2001
Location: Camarillo, Ca
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
If you are talking about the stock alarm system failing on its own without an aftermarket alarm, then here's what you do.
Pull the plastic panel off the back side of the drivers, and passenger door handles. Un bolt the door handle assembly.
There is a small white switch that when new snaps over the tumbler drum. You will need to snap them back on making sure to align the tumbler notch. Use a zip tie to keep it on or a dab of hot glue.
I hope this helps.
Pull the plastic panel off the back side of the drivers, and passenger door handles. Un bolt the door handle assembly.
There is a small white switch that when new snaps over the tumbler drum. You will need to snap them back on making sure to align the tumbler notch. Use a zip tie to keep it on or a dab of hot glue.
I hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
joel(PA)
Race Car Tech
0
10-01-15 10:25 AM