factory alarm indicator does not flash
#1
Full Member
Thread Starter
Join Date: Dec 2004
Location: atl
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
factory alarm indicator does not flash
my factory alarm arms fine, i lock the doors and the car beeps once. i have actually sat in the car closed the door locked the door and armed it. and then unlocked the door from inside and opened the door and the alram activated.. but the little alarm indicator on the console never flashes ever to show it is armed...
i too the console off and looked at the wires and it is connected and the bulb looks good. any other thoughts?
i too the console off and looked at the wires and it is connected and the bulb looks good. any other thoughts?
#5
Pimpin Rotors...and Hoes
Join Date: Feb 2001
Location: New Orleans, LA
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
Same thing here. Replaced the whole switch with another one. Both bulbs fine but still no flash or anything. However, the alarm does indeed work just like yours.
#6
I am the Architect
Join Date: Aug 2002
Location: Wpg, MB, Canada
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Mine does the same thing, actually when I bought the car the alarm did not work at all. The previous owner had a car starter installed and they disabled the alarm during the install. I removed the car starter and now the factory alarm works fine except the light. I pulled the tiny bulb out of the switch and it definitely looks like that is the problem, it is nice and black. Does anyone happen to know the part # for the bulb and possibly a price?
Thread
Thread Starter
Forum
Replies
Last Post
Farkel
3rd Generation Specific (1993-2002)
4
09-16-15 06:16 PM
ls1swap
3rd Generation Specific (1993-2002)
15
09-08-15 05:30 PM