Ok so I have a hole in my stock exhaust so I am going to replace it! I have heard so many things about boost creep and what not I figured I would ask the proffesionals what I can do to prevent this from happening.

I am going to put in the RB dual tip cat back exhuast! Everything else is stock. Will I or Will I Not get boost creep. I would also like to replace the down pipe as well! thanks again!

 

You can replace the stock catback and precat with the RB dual tip and a downpipe and be fine, as long as you keep the main cat on there.

 

What part of the exhaust?

+1 to above post...keep the cat and you'll be fine. If you don't have one already, though, get a boost gauge!

 

The hole is in the muffler part of the exhaust just inward of the exhuast tip! I do need to get a boos gauge though!

 

Well, you only need a "boos" gauge if you're a supporter of Michael Vick, George Bush or totally riced out FDs, but you do need a "boost" gauge. Sorry, gotta be a jackass every once and a while. Didn't mean to hate.

 

yeah, you'll be fine.

Boost gauge is always a good thing to have. No need to get fancy, either - Autometer works just fine.