Electrical problem
Electrical problem
I have a problem with my ignition/general electrics in the car.
When I start the engine it runs fine, but when I turn the key off and remove the key the engine is still running and i have to pull the EGI fuse to stop it from running.
Has anyone else had this problem?
When I start the engine it runs fine, but when I turn the key off and remove the key the engine is still running and i have to pull the EGI fuse to stop it from running.
Has anyone else had this problem?
Thats a good point, my alarm might have one built in.
It never used to do it, I have just dropped the engine back in it and now it does it, but the battery has been off so might have re-set the alarm.
It never used to do it, I have just dropped the engine back in it and now it does it, but the battery has been off so might have re-set the alarm.
This happened to me... It's prob not the alarm. Try removing the Relay next to the Main Relay in the Relay box right by the power steering unit. I've had mine off for 9 months. Turns of everytime now..
-AzEKnightz
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM






