EGT Help
#1
EGT Help
Well I have for the first time logged my EGT's via my Datalog. I am using a Redline guages exposed tip probe on my stock 13b-rew with my own 60-1 turbo kit. The probe is located maybe 2" from the turbine. Anyway, I'm a bit concerned about the temperatures I'm seeing. It maybe the exposed tip probe is reading higher but not sure. Here are some of my readings.
Idle 530 C 12.7 AFR 4 deg
Cruise 700 C 15.3 AFR 30 deg
16.5 psi 730 C raising to 840 C 11.3 AFR 15-17 deg with split of 12 deg
Let me know what you think. I know my temperatures are high for after turbo temperatures but I was thinking maybe my probe or measurements are off.
Idle 530 C 12.7 AFR 4 deg
Cruise 700 C 15.3 AFR 30 deg
16.5 psi 730 C raising to 840 C 11.3 AFR 15-17 deg with split of 12 deg
Let me know what you think. I know my temperatures are high for after turbo temperatures but I was thinking maybe my probe or measurements are off.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
Megasquirt timing map and EGt ?? what do you guys think
immanuel__7
Megasquirt Forum
3
08-22-15 09:34 PM