effect of switching CRV and ABV?
04-30-03, 11:10 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2002
Location: Los Alamos, NM
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
effect of switching CRV and ABV?
(I'm still trying to get a perfect boost pattern...)
I think my ABV and CRV have been switched since I bought the car (I checked the vacuum at which they should open to figure out which was which). What effect would this have? Anyone actually tried switching them to see what happens?
(I know I could just switch them and see if my boost problem is fixed, but I'd like to get some advice before I put everything back together)
I think my ABV and CRV have been switched since I bought the car (I checked the vacuum at which they should open to figure out which was which). What effect would this have? Anyone actually tried switching them to see what happens?
(I know I could just switch them and see if my boost problem is fixed, but I'd like to get some advice before I put everything back together)
05-01-03, 12:22 AM
#2
Lawn Ornament
actually switching the valves themselves will have no effect on performance of the twin turbo system... now switching the vacuum lines that feed the valves will cause them to act opposite of what they are supposed to...
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM