Drive side Door JDM and under the carpet.
#1
Junior Member
Thread Starter
Join Date: Aug 2008
Location: Red Deer
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Drive side Door JDM and under the carpet.
Wondering if some kind soul has some pics of the inside of the drivers door (behind the interior finishing.
I need to see what the wiring should look like, as mine is semi butchered and needs replacement. I have the shop manual, but it's only giving me half of the picture (Rather I would like to see a visual)
For under the carpet,
Located directly next to seat belt sensor connection there is a second connection that goes out below the car (It has some nice metal braiding) Wondering if anyone know what it does or is it After-Market?
Finally, The reason the Door is apart.
The JB02 (junction box) diode is ticking as though the seat belt wasn't being worn (it does this all the time) even when the belt is in place. Also, the Power Windows will only work in-time with this Diode, cutting out when the seat-belt light is off.
I have checked inside the JB02 and its fine (JB02 is what the shop manual calls it, its a rectangular black box located above the throttle , and has three connectors going into it).
The only other place I can see that has BOTH window and seat-belt is in the door. (Which itself seems odd, but that's what the book says)
Any idea's on where to look?
I need to see what the wiring should look like, as mine is semi butchered and needs replacement. I have the shop manual, but it's only giving me half of the picture (Rather I would like to see a visual)
For under the carpet,
Located directly next to seat belt sensor connection there is a second connection that goes out below the car (It has some nice metal braiding) Wondering if anyone know what it does or is it After-Market?
Finally, The reason the Door is apart.
The JB02 (junction box) diode is ticking as though the seat belt wasn't being worn (it does this all the time) even when the belt is in place. Also, the Power Windows will only work in-time with this Diode, cutting out when the seat-belt light is off.
I have checked inside the JB02 and its fine (JB02 is what the shop manual calls it, its a rectangular black box located above the throttle , and has three connectors going into it).
The only other place I can see that has BOTH window and seat-belt is in the door. (Which itself seems odd, but that's what the book says)
Any idea's on where to look?
#2
Rotary Freak