Drilled Aluminum Dead Pedal, Installed Pic
#5
I agree the Gas Pedals isn't a good match
I comtemplated making a gas pedal, but it really does need to have a smooth finish so your shoe slides along it when to gas it. Otherwise it make hang up on your shoe if you have it floored & back off.
I can make a proto type & try it. I just don't want anyone to bend up their 7 cause of me.
I can make a proto type & try it. I just don't want anyone to bend up their 7 cause of me.
Trending Topics
#9
Correct
Yes, I used Pop rivets to install it. The heads are flush & smaler. I also have an option with screws & nuts, but you have to remove the pedal to install the cover. With pop rivets you don't have to remove the pedal. You can drill it & install the rivets with the pedal installed.
IM working on etching "RX7" in 1 inch letters, vertically down the pedal, surrounded by the dimples. Should have the pedal & a photo ready early next week.
Also going to make a copy of the J-Spec passenger foot rest. It goes all the way across the passenger foot well. See one of my post for a photo of the J-spec car.
It will also be dimpled, but with larger holes, 1 inch.
I will offer a set price if it turns out good.
Thanks for your positive comments,
Emery
IM working on etching "RX7" in 1 inch letters, vertically down the pedal, surrounded by the dimples. Should have the pedal & a photo ready early next week.
Also going to make a copy of the J-Spec passenger foot rest. It goes all the way across the passenger foot well. See one of my post for a photo of the J-spec car.
It will also be dimpled, but with larger holes, 1 inch.
I will offer a set price if it turns out good.
Thanks for your positive comments,
Emery
#10
Pimpin Rotors...and Hoes
Join Date: Feb 2001
Location: New Orleans, LA
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
Re: All pedals shot
Originally posted by Sled Driver
Here's a shot of the Mazda OEM throttle. I got it from Cork Sport
Here's a shot of the Mazda OEM throttle. I got it from Cork Sport
#11
Full Member
Join Date: Apr 2001
Location: Pomona, CA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Sled- Did you send me a PM- I tried to check it, but was blank...send me an email with payment info please...if I could get the one with the etched letters too...."lcayman!@hotmail.com" thanks...
#12
Emery,
Please keep me updated. If it doesn't work out I still want to purchase the original in the pic.
Contact me @ bigdog8643@aol.com and I can send payment when you are ready.
Thanks
ViperEater
Please keep me updated. If it doesn't work out I still want to purchase the original in the pic.
Contact me @ bigdog8643@aol.com and I can send payment when you are ready.
Thanks
ViperEater
#13
Senior Member
Re: Correct
Originally posted by Sled Driver
Also going to make a copy of the J-Spec passenger foot rest. It goes all the way across the passenger foot well. See one of my post for a photo of the J-spec car.
It will also be dimpled, but with larger holes, 1 inch.
I will offer a set price if it turns out good.
Thanks for your positive comments,
Emery
Also going to make a copy of the J-Spec passenger foot rest. It goes all the way across the passenger foot well. See one of my post for a photo of the J-spec car.
It will also be dimpled, but with larger holes, 1 inch.
I will offer a set price if it turns out good.
Thanks for your positive comments,
Emery
#14
Passenger Foot Rest
I was looking into making the base of the passenger foot rest at an angle. I'll have to experiment & see what I can come up with.
It's going to be another week, or so, before I have photos. I'll keep everyone posted.
The 1 inch dimple holes, in a staggered pattern, look good. (I made a test piece) I think you'll be happy with the way it turns out.
Depending on how secure it is, IM going to try Velcro to hold it in place. Easy to remove to vacuum or remove the kick pnl, but sticks to carpet like glue. I put small strips on my passenger floormat & that sucker doesn't budge an inch!
It's going to be another week, or so, before I have photos. I'll keep everyone posted.
The 1 inch dimple holes, in a staggered pattern, look good. (I made a test piece) I think you'll be happy with the way it turns out.
Depending on how secure it is, IM going to try Velcro to hold it in place. Easy to remove to vacuum or remove the kick pnl, but sticks to carpet like glue. I put small strips on my passenger floormat & that sucker doesn't budge an inch!
#19
You have a Choice
They will be ready to ship on Wednesday. The picture isn't the greatest, but I have two versions. One has "RX7" etched on it. The other is plain.
My email address is elkozak@hotmail.com
You can contact me for ordering info.
If your interested in the passenger footrest. I can ship them together & give you a package price (save on shipping).
Unfortunetly the passenger foot rest wont be available for another week, or so (depends how many orders I get).
They are custom made, one at a time, & test fitted on my car.
My email address is elkozak@hotmail.com
You can contact me for ordering info.
If your interested in the passenger footrest. I can ship them together & give you a package price (save on shipping).
Unfortunetly the passenger foot rest wont be available for another week, or so (depends how many orders I get).
They are custom made, one at a time, & test fitted on my car.
Thread
Thread Starter
Forum
Replies
Last Post