3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Door lock problem

Thread Tools
 
Search this Thread
 
Old Apr 12, 2006 | 07:02 PM
  #1  
ManGaZeRo's Avatar
Thread Starter
Living the Dream
Tenured Member 15 Years
iTrader: (1)
 
Joined: Apr 2003
Posts: 1,342
Likes: 0
From: Temple city, CA
Door lock problem

I have just recently noticed that my door does not lock from the inside anymore. Meaning that when I open my door and lock the doors from the button than close the door it can still be opened. While when I am in the car with the door closed and lock it with the button it works. Any suggestions?
Reply
Old Apr 12, 2006 | 07:53 PM
  #2  
adam c's Avatar
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,370
Likes: 50
From: San Luis Obispo, Ca
To view the entire mechanism, you will need to remove the door panel. Once the panel is off you should be able to figure out what the problem is.
Reply
Old Apr 12, 2006 | 08:42 PM
  #3  
southernRX's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 36
Likes: 0
From: GA
On mine, if you lock the door from the inside, by pushing the button down, and then close the door(passenger side door only), you have to hold the outside door handle out to keep it from unlocking when you close the door.(I think that might be what your talking about)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TwentyDW
2nd Generation Specific (1986-1992)
4
Sep 2, 2015 06:42 PM




All times are GMT -5. The time now is 08:28 AM.