Differences between JDM Sway Bar and USDM Sway Bar?
Thread Starter
Senior Member
Joined: Apr 2007
Posts: 677
Likes: 0
From: Northern Virginia
Differences between JDM Sway Bar and USDM Sway Bar?
I received a set of JDM sway bars for the front and rear and compared them to the stock USDM ones and the JDM ones look exactly like the USDM ones. Are there any differences between JDM and USDM sway bars?
it also depends on trim level. the JDM had many many levels and editions....
Bathurst
Type R
Type RZ
Spirit R
Type RS
Efini
and many more
and most of these level had a different suspension setup; ie: stiffer, crisper, road noise etc......
if you want a newer sway bar... get a performance sway bar from almost any suspension manufacturer. you'd just be wasting money getting a JDM sway bar and then the car feels the exact same
Bathurst
Type R
Type RZ
Spirit R
Type RS
Efini
and many more
and most of these level had a different suspension setup; ie: stiffer, crisper, road noise etc......
if you want a newer sway bar... get a performance sway bar from almost any suspension manufacturer. you'd just be wasting money getting a JDM sway bar and then the car feels the exact same
Rotary Freak
Joined: Jun 2005
Posts: 1,675
Likes: 287
From: sydney
From a variety of early cars - possibly - give or take a layer of paint, diameters of rears, 18 and 13.8 mm. Fronts 30.5 and 28.7.
In what you would call post 99 cars, from memory, there are a number of changes to the rear ARB during the production run, which appear to be unrelated to the performance spec. As to what those changes are
In what you would call post 99 cars, from memory, there are a number of changes to the rear ARB during the production run, which appear to be unrelated to the performance spec. As to what those changes are
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM
need RX7
2nd Generation Specific (1986-1992)
11
Aug 19, 2015 08:27 AM
