Custom FMIC and Tails
11-20-03, 10:19 PM
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Jun 2003
Location: Central Florida
Posts: 1,619
Likes: 0
Received 0 Likes
on
0 Posts
Custom FMIC and Tails
I have been working on a new custom FMIC 3row that i am posibly going to market for sale maybe in the future.. Retail somewhere around 650bucks. Also I been doing some work on my tails, I did the 99Spec tails but with a twist.. using my company logo as my blinker.. Here are some pics..
11-20-03, 11:04 PM
#2
Ee / Cpe
Join Date: Jan 2003
Location: Gaithersburg, MD / WVU
Posts: 2,843
Likes: 0
Received 2 Likes
on
2 Posts
Im in the process of doing my custom front mount,
my core is a turboxs hyperflow frount mount, any advice for piping would be appreciated
thats a pic of the core
and your blinker is nifty! what company
my core is a turboxs hyperflow frount mount, any advice for piping would be appreciated
thats a pic of the core
and your blinker is nifty! what company
Last edited by XSTransAm; 11-20-03 at 11:07 PM.
11-20-03, 11:18 PM
#3
Banned. I got OWNED!!!
Thread Starter
Join Date: Jun 2003
Location: Central Florida
Posts: 1,619
Likes: 0
Received 0 Likes
on
0 Posts
the company is Energie Developments - www.energeidev.com
for the piping, its pretty tricky at first with endtanks facing out.. best thing to do is get a nice u-bend, then a pipe with a 90degree on the bottom with about 12inches of straight pipe, then run from your turbos and elbow and figure out where they will meet up and make a bent pipe to go between the 2. It sounds simple and hard at the same time but it really is pretty simple.
for the piping, its pretty tricky at first with endtanks facing out.. best thing to do is get a nice u-bend, then a pipe with a 90degree on the bottom with about 12inches of straight pipe, then run from your turbos and elbow and figure out where they will meet up and make a bent pipe to go between the 2. It sounds simple and hard at the same time but it really is pretty simple.
11-20-03, 11:22 PM
#4
Ee / Cpe
Join Date: Jan 2003
Location: Gaithersburg, MD / WVU
Posts: 2,843
Likes: 0
Received 2 Likes
on
2 Posts
did you remount your radiator? im having trouble figuring out what to do with the radiator hoses, I bought some sheet metal so im gonna attempt making the backets tomorrow. how did you do yours?
11-20-03, 11:23 PM
#5
Banned. I got OWNED!!!
Thread Starter
Join Date: Jun 2003
Location: Central Florida
Posts: 1,619
Likes: 0
Received 0 Likes
on
0 Posts
im still working on mypiping, but yeah my radiator is layed back down for the time beging, it might get raised a lil bit to fit piping through, still trying to decide..
Matt
Matt
11-20-03, 11:30 PM
#6
Ee / Cpe
Join Date: Jan 2003
Location: Gaithersburg, MD / WVU
Posts: 2,843
Likes: 0
Received 2 Likes
on
2 Posts
just found this, it tells how to trim the factory piping to make it work with standing up the radiator, and the brackets needed.... maybe you can put it to some good use too 
keep me updated, and ill do the same
http://flathat.woodstream.net/RX7/Do...stall_Docs.pdf
keep me updated, and ill do the samehttp://flathat.woodstream.net/RX7/Do...stall_Docs.pdf
Trending Topics
11-21-03, 05:35 AM
#8
Lucky
Join Date: Mar 2001
Location: Dubuque, Iowa
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
Just thought I would let you know that you spelled the link to your companies website wrong, I believe you were looking for www.energiedev.com, just thought I would help.