Custom Cup Holders For Your FD...
#53
HERE THEY ARE!!!
I tried to upload the pics, but the message board must be on it monthly cycle
... but anyway, here are the links the pics are located.
These are a few that I took on the curing jig... notice the 20 lbs dumbbell applying pressure to the cup holder... as indestructible as one can get
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=7076.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=6e7b.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=e6ba.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=51ec.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=51a4.jpg
Here's the finished version...
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=89d7.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=23f4.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=1aad.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=64ed.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=3b32.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=69a4.jpg
![rolleyes](https://www.rx7club.com/images/smilies/rolleyes.gif)
... but anyway, here are the links the pics are located.
These are a few that I took on the curing jig... notice the 20 lbs dumbbell applying pressure to the cup holder... as indestructible as one can get
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=7076.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=6e7b.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=e6ba.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=51ec.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=51a4.jpg
Here's the finished version...
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=89d7.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=23f4.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=1aad.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=64ed.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=3b32.jpg
http://f1.pg.photos.yahoo.com/ph/hdp...&.dnm=69a4.jpg
#55
Wow that's tight...it looks real nice. I dunno if I want to hack up my center peice, BUT...it still looks real nice. Props to ya.
Oh and how did you get it to be so sturdy? Because usually that center area where the cupholder is, that's where a lot of people lean on, and the plastic underneath it often cracks...
Did you insert a little metal plate or something of the sort to reinforce it?
Oh and how did you get it to be so sturdy? Because usually that center area where the cupholder is, that's where a lot of people lean on, and the plastic underneath it often cracks...
Did you insert a little metal plate or something of the sort to reinforce it?
#57
Originally posted by areXseven
Two in line wouldn't be a bad idea.
Two in line wouldn't be a bad idea.
![Stick Out Tongue](https://www.rx7club.com/images/smilies/tongue.gif)
Getting another cup holder is like getting back seats...they DON'T belong in a sports car hehe (I think even ONE cupholder is walking on ice as it is!). That's what you have a passenger for!
Last edited by FDNewbie; 06-25-04 at 04:30 PM.
#58
Insane Burnout
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Oct 2003
Location: Pleasanton, CA
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
That looks awesome. I agree with FDNewbie, that i wouldn't want to hack the center console, but it still looks nice. I would definetly get one.
One thing that kinda worried me is the depth of the cup holder. It doesn't look that deep, meaning that most of the drink would be above the holder. And if the drink was kinda tall, its easier to spill, which is something every FD owner dreads.
Also how tight is the cup holder? Did the soda can slip right in, or was it a snug fit?
One thing that kinda worried me is the depth of the cup holder. It doesn't look that deep, meaning that most of the drink would be above the holder. And if the drink was kinda tall, its easier to spill, which is something every FD owner dreads.
Also how tight is the cup holder? Did the soda can slip right in, or was it a snug fit?
#61
Originally posted by FDNewbie
Oh and how did you get it to be so sturdy? Because usually that center area where the cupholder is, that's where a lot of people lean on, and the plastic underneath it often cracks...
Did you insert a little metal plate or something of the sort to reinforce it?
Oh and how did you get it to be so sturdy? Because usually that center area where the cupholder is, that's where a lot of people lean on, and the plastic underneath it often cracks...
Did you insert a little metal plate or something of the sort to reinforce it?
#62
Originally posted by ROTORhead93
That looks awesome. I agree with FDNewbie, that i wouldn't want to hack the center console, but it still looks nice. I would definetly get one.
One thing that kinda worried me is the depth of the cup holder. It doesn't look that deep, meaning that most of the drink would be above the holder. And if the drink was kinda tall, its easier to spill, which is something every FD owner dreads.
Also how tight is the cup holder? Did the soda can slip right in, or was it a snug fit?
That looks awesome. I agree with FDNewbie, that i wouldn't want to hack the center console, but it still looks nice. I would definetly get one.
One thing that kinda worried me is the depth of the cup holder. It doesn't look that deep, meaning that most of the drink would be above the holder. And if the drink was kinda tall, its easier to spill, which is something every FD owner dreads.
Also how tight is the cup holder? Did the soda can slip right in, or was it a snug fit?
A soda can is about 2 1/2" dia and the I.D. of the cup holder is 2 3/4", so it has very little room to move around. And besides, this is located in the center of the car, which remains relatively level while driving unless you roll the car. If you are able to turn over the drink while driving, then you probably should be drinking one at that moment.
#64
Not trying to be a dick, but here are some things to think about for your cup holder project.
It only fits one size drink. If you are not drinking a can soda, you got no cup holder.
As another member mentioned, the depth of the holder may be a problem when going 0 to 60 in 4![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
I have the holder that fumanchu posted, and it works great because it is adjustable, 4 inches deep, and has a little spill tray on it, Just in case.
If you could get a holder like this to somehow mount around console behind the seat you would have a kick *** set up. Maybe take 2 of these and somehow connect them, then wrap them over the console.
It only fits one size drink. If you are not drinking a can soda, you got no cup holder.
As another member mentioned, the depth of the holder may be a problem when going 0 to 60 in 4
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
I have the holder that fumanchu posted, and it works great because it is adjustable, 4 inches deep, and has a little spill tray on it, Just in case.
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
#65
Originally posted by allenhah
Looks great! I'm just interested in if you plan on producing some kind of kit to sell to the rest of us, and if the installation process would be difficult.
Nice work!
Looks great! I'm just interested in if you plan on producing some kind of kit to sell to the rest of us, and if the installation process would be difficult.
Nice work!
Last edited by HDP; 06-25-04 at 06:33 PM.
#66
Lawn Ornament
![](https://www.rx7club.com/images/misc/10_year_icon.png)
I have a better Idea...
Ok so the depth is a problem cause you run into the tranny tunnel....
Well why not just cut into the tranny tunnel, you should be able to get about 1-2 inches more before you hit the tranny...
That way if you have a cup of coffee it will be kept nice and warm by the heat the transmission is giving off.
Yes I guess you are screwed with ice cold drinks, but just as well you are screwed if you want to fit a supersized (god forbid) coke into that cup holder thats meant for a soda can....
Ok so the depth is a problem cause you run into the tranny tunnel....
Well why not just cut into the tranny tunnel, you should be able to get about 1-2 inches more before you hit the tranny...
That way if you have a cup of coffee it will be kept nice and warm by the heat the transmission is giving off.
Yes I guess you are screwed with ice cold drinks, but just as well you are screwed if you want to fit a supersized (god forbid) coke into that cup holder thats meant for a soda can....
#67
Olympic Muff Diver
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Apr 2003
Location: Boston, MA
Posts: 1,301
Likes: 0
Received 0 Likes
on
0 Posts
i think fumahchu's is much better. if you really feel the need to have a cupholder, adjustable is probably a good idea.
since i usually drink bottled water anyway it doesnt matter. i think i'd rather just have empty soda bottles and pour whatever it is i'm drinking into the bottles.
since i usually drink bottled water anyway it doesnt matter. i think i'd rather just have empty soda bottles and pour whatever it is i'm drinking into the bottles.
#68
Originally posted by Jesuscookies
Not trying to be a dick, but here are some things to think about for your cup holder project.
It only fits one size drink. If you are not drinking a can soda, you got no cup holder.
As another member mentioned, the depth of the holder may be a problem when going 0 to 60 in 4![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
I have the holder that fumanchu posted, and it works great because it is adjustable, 4 inches deep, and has a little spill tray on it, Just in case.
If you could get a holder like this to somehow mount around console behind the seat you would have a kick *** set up. Maybe take 2 of these and somehow connect them, then wrap them over the console.
Not trying to be a dick, but here are some things to think about for your cup holder project.
It only fits one size drink. If you are not drinking a can soda, you got no cup holder.
As another member mentioned, the depth of the holder may be a problem when going 0 to 60 in 4
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
I have the holder that fumanchu posted, and it works great because it is adjustable, 4 inches deep, and has a little spill tray on it, Just in case.
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
I came up with this idea to avoid any add-on, clip-type, non-custom style drink holder. I think my idea is sleek and does not deter from the looks of the interior.
This design was not made for 4 second 0-60 sprints or road course sessions around Laguna Seka, it was designed to hold a refreshing can soda or cup drink during road trips to RX-7 meets and car shows. I could have used it when I went to Rotary Revolution, my drives to Birmingham for club meetings, weekend trip to Atlanta to hang with the SE group at NOPI ... So I apologize for not designing this to fit your needs as well.
Last edited by HDP; 06-25-04 at 06:59 PM.
#74
il Cosa Nostra e vivo!!
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (1)
Join Date: May 2003
Location: Dove le cose sono fatte il vecchio moda il senso
Posts: 2,097
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by austinsFD
DUDE ITS A SPORTS CAR NOT A LUXURY CAR!
DUDE ITS A SPORTS CAR NOT A LUXURY CAR!
Unless of course,......you don't consider the 911 a sports car.
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
#75
1JZ powered
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Jul 2001
Location: Where there's only two seasons, hot and wet! I love Okinawa
Posts: 4,423
Likes: 0
Received 0 Likes
on
0 Posts
neat! Too bad I slide my seat foward...I'd have to reach BACK to get my drink :P...midgets driving FD's I tell ya!