CRV is not connected...how to cap it? help.
#1
Senior Member
Thread Starter
Join Date: May 2004
Location: El Paso
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
CRV is not connected...how to cap it? help.
OK so we did the non-seq mod and I am getting ful 13psi of boost, but at 5000 RPM and I hear boost leaking. I chedk and my CRV is unhooked from the y pipe, from the big hose. The vaccum hose is connected to the UIM and somewhere else via a t, but I cant see where. I connected the CRV again to the y pipe, but should I cap it? and how? With a cork? or should I discconect it from the y pipe and plug the hole? Thanks
#3
Senior Member
Thread Starter
Join Date: May 2004
Location: El Paso
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
Right, so I have read. The CRV was unplugged from the y pipe, I think that was the problem. I will test it in a few hours. Thanks Goodfella. BTW, those manis I got from you look great!!
Thread
Thread Starter
Forum
Replies
Last Post