Coupler / Reducer
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: Salina, Kansas
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Coupler / Reducer
Thought I would ask before pulling my radiator. I need to replace all of my silicone couplers and the reducer on the intake side of my fmic. I pulled the old cracked ones and measured the inside diameter, but I am wondering if they are stretched out. What I came up with is 2.75 on the couplers, I am pretty sure this is correct as I measured the outside diameter of the intercooler pipe, but on the reducer I can't get my gage in there to measure the outside of the pipe coming of the IC. I had to take my measurement from the old reducer. It measures 2.75 to 3.22. Closest would be 2.75 to 3.25, trouble is no one sell that size reducer. The next closest option I could find is a 2.75 to 3.00. The IC is a Greedy V-Core. It isn't that hard for me to pull my radiator and measure it. The biggest hassle is getting all the air out of the cooling system again. If anyone just happens to have this answer it would be greatly appreciated. RD