Couple of gasket questions.
11-12-01, 04:51 PM
#1
Senior Member
Thread Starter
Couple of gasket questions.
Well some new toys arove today! (thanks to Jason@rx7store.net) I got my AST, Apexi N1 CB, Pettit DP, Dual A-pillar pod (for my water and boost Defi gauges I got on friday) Efini y-pipe, and my Efini silver front and rear emblems. My Apexi Turbotimer and my PowerFC+Commander are in the mail too! 
O.. and my fluidyne rad is sitting in the garage waiting too lol.
I'm going to install the gauges when I get home and if I have time I was going to start on the DB, y-pipe and CB. I didn't get any gaskets for any of the parts. In case I don't get a response back from Jason tonight I was wondering. Jason said he was waiting for a gasket for the CB but I was wondering if I need gaskets for any of the other parts or can I just use the old ones (if there are any)? If I need gaskets for the DB or y-pipe I'll just wait and not start on that.
Thanks in advance
Chris
O.. and my fluidyne rad is sitting in the garage waiting too lol.I'm going to install the gauges when I get home and if I have time I was going to start on the DB, y-pipe and CB. I didn't get any gaskets for any of the parts. In case I don't get a response back from Jason tonight I was wondering. Jason said he was waiting for a gasket for the CB but I was wondering if I need gaskets for any of the other parts or can I just use the old ones (if there are any)? If I need gaskets for the DB or y-pipe I'll just wait and not start on that.
Thanks in advance
Chris
11-13-01, 02:09 PM
#4
Full Member
Join Date: Apr 2001
Location: SC
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
gaskets for everything 
the Efini Y-Pipe should have come with the required gaskets. you'll have to check with jason on that.
also, i would think that the CB would have come with a gasket, but again, check with jason on that.
the DP will require 2 gaskets, which it probably doesn't come with. the one gasket that goes on the turbo manifold side is a $45 gasket from Mazduh
some people reuse old gaskets, but not me. i'd recommend replacing any used gasket. there's nothing i hate more than "re-doing" a job
good luck.....
the Efini Y-Pipe should have come with the required gaskets. you'll have to check with jason on that.
also, i would think that the CB would have come with a gasket, but again, check with jason on that.
the DP will require 2 gaskets, which it probably doesn't come with. the one gasket that goes on the turbo manifold side is a $45 gasket from Mazduh
some people reuse old gaskets, but not me. i'd recommend replacing any used gasket. there's nothing i hate more than "re-doing" a job
good luck.....
11-13-01, 02:49 PM
#5
Senior Member
Thread Starter
Originally posted by R1 POWR
gaskets for everything
the Efini Y-Pipe should have come with the required gaskets. you'll have to check with jason on that.
also, i would think that the CB would have come with a gasket, but again, check with jason on that.
the DP will require 2 gaskets, which it probably doesn't come with. the one gasket that goes on the turbo manifold side is a $45 gasket from Mazduh
some people reuse old gaskets, but not me. i'd recommend replacing any used gasket. there's nothing i hate more than "re-doing" a job
good luck.....
gaskets for everything
the Efini Y-Pipe should have come with the required gaskets. you'll have to check with jason on that.
also, i would think that the CB would have come with a gasket, but again, check with jason on that.
the DP will require 2 gaskets, which it probably doesn't come with. the one gasket that goes on the turbo manifold side is a $45 gasket from Mazduh
some people reuse old gaskets, but not me. i'd recommend replacing any used gasket. there's nothing i hate more than "re-doing" a job
good luck.....
)
11-13-01, 03:48 PM
#6
Senior Member
Join Date: Oct 2001
Location: The 'Nati, Ohio
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
I reused the gasket between the turbo and the down pipe. It is metal, and looked to be in good shape.
The gasket between the down pipe and the mid pipe literally fell apart.
The gasket between the mid pipe and the cat back was in ok shape, but I still replaced it.
I bought all my gaskets from Mazda. I don't think the cat back will come with one....
Later,
Patrick
The gasket between the down pipe and the mid pipe literally fell apart.
The gasket between the mid pipe and the cat back was in ok shape, but I still replaced it.
I bought all my gaskets from Mazda. I don't think the cat back will come with one....
Later,
Patrick
11-13-01, 03:56 PM
#7
Senior Member
Thread Starter
Originally posted by pweizman
I reused the gasket between the turbo and the down pipe. It is metal, and looked to be in good shape.
The gasket between the down pipe and the mid pipe literally fell apart.
The gasket between the mid pipe and the cat back was in ok shape, but I still replaced it.
I bought all my gaskets from Mazda. I don't think the cat back will come with one....
Later,
Patrick
I reused the gasket between the turbo and the down pipe. It is metal, and looked to be in good shape.
The gasket between the down pipe and the mid pipe literally fell apart.
The gasket between the mid pipe and the cat back was in ok shape, but I still replaced it.
I bought all my gaskets from Mazda. I don't think the cat back will come with one....
Later,
Patrick
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM