3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Condenser part number-clarification needed..

Thread Tools
 
Search this Thread
 
Old Aug 16, 2005 | 10:00 PM
  #1  
Badappex's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Aug 2001
Posts: 377
Likes: 0
From: Florida
Condenser part number-clarification needed..

I pulled off my old AC condenser because I had a leak. I am trying to figure out the part number for a reorder but some f the lettering has rubbed off. Was wondering if anyone can help me find the manufacturer.

Letters seems like HF heat exchanger
Part number 147700-4653 02M2

Any help?
Reply
Old Aug 17, 2005 | 01:53 AM
  #2  
maxcooper's Avatar
WWFSMD
Tenured Member 15 Years
 
Joined: Jun 2001
Posts: 5,035
Likes: 4
From: SoCal
I'm not sure how good they are, but I was looking at partsamerica.com for a condenser (radiator-looking thing that goes in the front of the car) recently, and they had a few listed in the $200-300 range. I'm not sure how much the dealer wants, but I am guessing more. Check with Malloy Mazda for a good price on OEM parts.

There were two different compressors, but I was not aware that more than one condenser was available with the FD. Might it be related to R-12 versus R-134a differences? I really have no idea, but I am curious since I would like to get my A/C working again, too.

-Max
Reply
Old Aug 17, 2005 | 05:05 PM
  #3  
Badappex's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Aug 2001
Posts: 377
Likes: 0
From: Florida
Radiator barn has them for $135 for rx7's. I just wanted to know if anyone has ever heard of this part number/company.

Rx-7's did come with 2 different types of condensers that arent interchangeable. thanks
Reply
Old Aug 17, 2005 | 09:57 PM
  #4  
quid's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 116
Likes: 0
From: San Antonio, TX
I just pulled mine off and as far as I can tell it does not have a leak. It is not the best looking part on the planet, bent fins, but I could give it to you cheap. I will pretty much give it to you.
Reply
Old Aug 17, 2005 | 11:44 PM
  #5  
quicksilver_rx7's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Feb 2005
Posts: 1,336
Likes: 0
From: Charlotte, NC
Originally Posted by Badappex
Rx-7's did come with 2 different types of condensers that arent interchangeable. thanks
The only difference is the bracket design for the mounts

The major differences were the compressor, heat exchanger, and receiver/dryer

Last edited by quicksilver_rx7; Aug 17, 2005 at 11:55 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
driftfcbuckey
The Bad & Fugly Members
10
Dec 2, 2015 05:48 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM




All times are GMT -5. The time now is 01:33 PM.