Cold start
05-14-08, 03:58 AM
#1
Newbie
Thread Starter
Join Date: May 2008
Location: Melbourne
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Cold start
Hey. I'm new to the forum.
I have an FD with a wolf. I recently had the wolf retuned and now for about the first half a minute when i cold start it - it dies shortly after. Doesn't stumble - just dies. It always starts again afterwards (so i'm assuming it's no overfueling otherwise it could flood) however it usually goes through this cycle of starting and stalling several times (4-5). Revving it to 2500 sometimes even doesn't help.
I've done some searching - is it worth disconnecting the AWS in case it's playing up, or is this most likely just a case of too little fuel? I'm not seeing any coolant smoke or smells.
Pat
I have an FD with a wolf. I recently had the wolf retuned and now for about the first half a minute when i cold start it - it dies shortly after. Doesn't stumble - just dies. It always starts again afterwards (so i'm assuming it's no overfueling otherwise it could flood) however it usually goes through this cycle of starting and stalling several times (4-5). Revving it to 2500 sometimes even doesn't help.
I've done some searching - is it worth disconnecting the AWS in case it's playing up, or is this most likely just a case of too little fuel? I'm not seeing any coolant smoke or smells.
Pat
Thread
Thread Starter
Forum
Replies
Last Post