cold idle problem
Thread Starter
Junior Member
Joined: Jul 2007
Posts: 15
Likes: 0
From: montreal qc can
cold idle problem
Hi guys, I'm new on the forum and I bought a JDM Fd 4 weeks ago.
The car is great but 1 week ago it's start to have problem with cold start. The car start with no problem and goes up to 2500 rpm for few second and then it stall. When i keep the throttle up it's fine. When the engine is hot it's fine.
I've search on the forum but most problems are for hots starts.
So were should I start.
My mods are arc intake box, cat back, power fc. Stock main cat with no pre cat.
The problem start when I unplugged the hose on the map sensor, I run it for 2 min and then I put it back.
Can it be the cat, the tps, etc.
Thanks alot
The car is great but 1 week ago it's start to have problem with cold start. The car start with no problem and goes up to 2500 rpm for few second and then it stall. When i keep the throttle up it's fine. When the engine is hot it's fine.
I've search on the forum but most problems are for hots starts.
So were should I start.
My mods are arc intake box, cat back, power fc. Stock main cat with no pre cat.
The problem start when I unplugged the hose on the map sensor, I run it for 2 min and then I put it back.
Can it be the cat, the tps, etc.
Thanks alot
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Adaptronic Cranking fuel table messed up?
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
83revival
New Member RX-7 Technical
4
Sep 3, 2015 10:42 PM