coils and ohms
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jun 2003
Location: Pittsburgh
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
coils and ohms
Ok I have a slight miss and I am investigating it. The manual says that all the coils should read less than 1 ohm between the A-B connectors. Well my leading reads 1.0 and the trailings are 1.3. I called Ray Crowe and he tested the ones he had in stock and they read .2 and .5. Guess I should replace them all since they are out of spec? Damn things are expensive. At least the leading coil is close to spec.
Any recommendations would be great.
Thanks
Any recommendations would be great.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM