Clutch Disk , for stock FD with Proight 9.5 lbs Flywheel
Thread Starter
Senior Member
iTrader: (6)
Joined: Jan 2008
Posts: 436
Likes: 1
From: Montreal , Canada
Clutch Disk , for stock FD with Proight 9.5 lbs Flywheel
What clutch disk is recommended for such an application ( near stock power FD , 9.5 lbs Aluminum
ACT Pro light Flywheel )
car will be used as a Daily with some track use , but more spirited driving than anything . i was looking at a few choices from clutch net listed below.
does a 3puck disk ( sprung ) require an after market pressure plate?
i don't mind compromised drivability but i don't want to damage my drive train
i will mainly be using 17" ( <20 lbs ) wheels with max 245 rear tires
i do not launch from red lights or drag race , i am concerned about damaging form high RPM ( ~8000) up shifts
here are the ones i am looking at :
any advice ,comments ( about clutch disk ) will be appreciated
thx in advance
3 puck ( Overkill ??? )
http://www.clutchnet.com/product.php...6&cat=0&page=1
6 puck ( a bit overkill ??)
http://www.clutchnet.com/product.php...8&cat=0&page=1
See details Fiber Carbon clutch disc
http://www.clutchnet.com/product.php...6&cat=0&page=1
Smooth lock ( a bit to smooth for light flywheel ??? )
http://www.clutchnet.com/product.php...2&cat=0&page=1
thx for reading
ACT Pro light Flywheel )
car will be used as a Daily with some track use , but more spirited driving than anything . i was looking at a few choices from clutch net listed below.
does a 3puck disk ( sprung ) require an after market pressure plate?
i don't mind compromised drivability but i don't want to damage my drive train
i will mainly be using 17" ( <20 lbs ) wheels with max 245 rear tires
i do not launch from red lights or drag race , i am concerned about damaging form high RPM ( ~8000) up shifts
here are the ones i am looking at :
any advice ,comments ( about clutch disk ) will be appreciated
thx in advance
3 puck ( Overkill ??? )
http://www.clutchnet.com/product.php...6&cat=0&page=1
6 puck ( a bit overkill ??)
http://www.clutchnet.com/product.php...8&cat=0&page=1
See details Fiber Carbon clutch disc
http://www.clutchnet.com/product.php...6&cat=0&page=1
Smooth lock ( a bit to smooth for light flywheel ??? )
http://www.clutchnet.com/product.php...2&cat=0&page=1
thx for reading
Thread
Thread Starter
Forum
Replies
Last Post



