3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Cleaning radiator / condenser fins

Thread Tools
 
Search this Thread
 
Old 08-05-02, 04:30 PM
  #1  
Senior Member

Thread Starter
 
80-CU.IN.T's Avatar
 
Join Date: Jul 2001
Location: Kalifornia
Posts: 360
Likes: 0
Received 0 Likes on 0 Posts
Cleaning radiator / condenser fins

What chemicals can be used to clean an air conditioning condenser or radiator?
The condenser has road tar, paint over spray, ect. on it. How can I clean in between the fins? Hopefully there is a miracle chemical for cleaning aluminum. If necessary the condenser can be dipped.

"ANY ADVICE WOULD BE GREATLY APPRECIATED"
Old 08-05-02, 04:44 PM
  #2  
almost done

 
KINETIK_FD3S's Avatar
 
Join Date: Dec 2001
Location: 250 HZ
Posts: 1,049
Likes: 0
Received 0 Likes on 0 Posts
not sure but you can try degreeser.
Old 08-05-02, 07:27 PM
  #4  
Senior Member

Thread Starter
 
80-CU.IN.T's Avatar
 
Join Date: Jul 2001
Location: Kalifornia
Posts: 360
Likes: 0
Received 0 Likes on 0 Posts
I High pressure steamed it and that helped. High air pressure can bend the fins. I was hoping to find a chemical cleaner for aluminum. Does anyone know of one?
Old 08-05-02, 09:34 PM
  #5  
Rotary Freak

 
duboisr's Avatar
 
Join Date: Jan 2002
Location: Nashville Tn
Posts: 2,171
Likes: 0
Received 1 Like on 1 Post
Carb cleaner from Auto Zone in the yellow can is cheap and works well then wash with water if you are thinking the cleaner will harm the aluminum . Why over kill with some hard to find costly chemical . the carb cleaner will remove dirt, oil grease paint, the water will remove the cleaner easy fix.
Old 08-06-02, 12:09 AM
  #6  
Senior Member

Thread Starter
 
80-CU.IN.T's Avatar
 
Join Date: Jul 2001
Location: Kalifornia
Posts: 360
Likes: 0
Received 0 Likes on 0 Posts
Thanks for all the responses.
I talked with a friend and he has a light acid solution and neutralizer that he said he works great. No label. I will try it on some 6061 -T6 and some and other various types of aluminum that I have lying around. If it isn't too corrosive I will use it. He said it will make my condenser look like new again.




All times are GMT -5. The time now is 07:19 AM.