changing oil...
07-31-02, 08:12 PM
#1
boost deprived
Thread Starter
Join Date: May 2002
Location: sioux city, IA
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
changing oil...
gettin ready to change the oil for the first time....oil's already drained, do i have to take anything else off to get the filter out? quick replies would be helpful... thanks in advance
jimmy
jimmy
07-31-02, 08:20 PM
#3
boost deprived
Thread Starter
Join Date: May 2002
Location: sioux city, IA
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
well that was a breeze... thanks tom....another quickie...what type of coolant is the best, i've heard good and bad about evans coolant...still need to get some water wetter, prolly flush the coolant out sometime this weekend if i don't have to work.
07-31-02, 09:25 PM
#4
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
You should puncture the filter with a screwdriver or something before removing it. Reduces the mess.
As far as coolant, just get ethylene glycol - prestone, whoever.
Evans coolant requires you to remove all traces of water from your cooling system which is very difficult to do without starting off with a new engine/rebuild. I personally haven't experienced the overheating problems that many seem to have so I have no desire to run Evans.
As far as coolant, just get ethylene glycol - prestone, whoever.
Evans coolant requires you to remove all traces of water from your cooling system which is very difficult to do without starting off with a new engine/rebuild. I personally haven't experienced the overheating problems that many seem to have so I have no desire to run Evans.
Thread
Thread Starter
Forum
Replies
Last Post
pfsantos
2nd Generation Specific (1986-1992)
1
09-30-15 01:29 PM