CCN,PAC,NTR are high lighted
07-14-07, 11:05 AM
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Jul 2003
Location: The Great Northwest
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
CCN,PAC,NTR are high lighted
These are faulted in the power fc commander! I just installed the motor and power fc. I want to make sure that the power fc learns with nothing faulted. I checked the ntr/neutral switch per the FSM with no defects noted, but yet still faulted in the power fc. When I un plug the connector from the neutral switch it is no longer high lighted on the commander.
PAC (port air control valve)- I'll check the operation per the fsm F-120
CCN (charge control)- I'll check the operation per the fsm F-87
If anybody has any thoughts or prior experience please respond.
Rebuilt street port engine with about 20 min of idling
Efini twins
power fc
850cc pri & secondary
HKS twin power
PAC (port air control valve)- I'll check the operation per the fsm F-120
CCN (charge control)- I'll check the operation per the fsm F-87
If anybody has any thoughts or prior experience please respond.
Rebuilt street port engine with about 20 min of idling
Efini twins
power fc
850cc pri & secondary
HKS twin power
Thread
Thread Starter
Forum
Replies
Last Post
zuesskroph
2nd Generation Specific (1986-1992)
0
08-13-15 06:05 PM
