3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Be Careful with eBay RX-8 starters

Thread Tools
 
Search this Thread
 
Old Oct 23, 2015 | 11:28 AM
  #1  
jasonn's Avatar
Thread Starter
Half Triangle
Tenured Member: 15 Years
iTrader: (10)
 
Joined: Mar 2009
Posts: 408
Likes: 2
From: Walnut, CA
Be Careful with eBay RX-8 starters

Hello everyone,
Just letting you know to be careful with the eBay ad that has the rx-8 starter inside a rx-7 housing. The unit itself is just machined down but it's still 5-6CM too short. Depending on your flywheel, you may be wearing away at the starter gears. The unit itself is very nice and swapping over the rx-7 housing is very easy.

From top, eBay machined housing on the left, OEM starter, eBay machined housing on the right. Bottom right, how the OEM gear is suppose to look with the 90 degree cut on the gear. Bottom left after use, it wore away due to it slipping off the flywheel.


Last edited by jasonn; Oct 23, 2015 at 11:31 AM.
Reply
Old Oct 23, 2015 | 11:43 AM
  #2  
heynoman's Avatar
heynoman
Tenured Member 15 Years
iTrader: (5)
 
Joined: Jul 2009
Posts: 469
Likes: 1
From: Illinois
Your thread title should read " be careful buying anything electronic from eBay " . I especially stay away from starters and alternators seeing that they can be bad from the manufacturer and you still get stuck paying for shipping on a exchange under warranty (if you have one) . Cheaper is always going to cost you more. Shop local, support a local business, get a warranty that isn't going to cost you it's worth spend the couple extra dollars . And use both hands when flipping the bird at junky parts .
Reply
Old Oct 23, 2015 | 12:24 PM
  #3  
jasonn's Avatar
Thread Starter
Half Triangle
Tenured Member: 15 Years
iTrader: (10)
 
Joined: Mar 2009
Posts: 408
Likes: 2
From: Walnut, CA
Hahaha, one hand had to hold the camera! The starter itself is a good unit, just the machining was off. Luckily swapping the internals was pretty easy.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rayray9206
New Member RX-7 Technical
10
Oct 21, 2015 01:43 PM




All times are GMT -5. The time now is 12:38 AM.