3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

car wont start!!! please Hep!

Thread Tools
 
Search this Thread
 
Old Jan 9, 2006 | 10:47 PM
  #1  
FD3RotorTurbo's Avatar
Thread Starter
FD3Rotor
iTrader: (1)
 
Joined: May 2003
Posts: 418
Likes: 1
From: Utah
Unhappy car wont start!!! please Hep!

so my car got into a wreck last Feb... i have putting it together ever since. (project) did paint job and all the fun stuff. so tonight i finally decided to try and start her. i have tried crank starting it and nothing... so we tried doing a pull start and still nothing. it wont even kick. i checked my plugs and im gettin spark, my fuel reg gauge is saying that im getting fuel... im so lost and frusterated!!!!!!!!! anyone had this problem? anyone know what could be up? any help would be great!
thanks a ton
-Ryan
Reply
Old Jan 9, 2006 | 10:51 PM
  #2  
FD3RotorTurbo's Avatar
Thread Starter
FD3Rotor
iTrader: (1)
 
Joined: May 2003
Posts: 418
Likes: 1
From: Utah
also i noticed that when i crank it, if i put my hand over my exhaust it sucks in... not push out...
Reply
Old Jan 10, 2006 | 06:39 PM
  #3  
FD3RotorTurbo's Avatar
Thread Starter
FD3Rotor
iTrader: (1)
 
Joined: May 2003
Posts: 418
Likes: 1
From: Utah
anyone???
Reply
Old Jan 10, 2006 | 07:03 PM
  #4  
weetbix13's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 423
Likes: 0
From: New Zealand
fouled plug? reversed fuel lines (that was my problem)?
need to know if you pulled/unplugged the engine and harness before anyone can help you too much more.

i know you have fuel pressure... but have you tried to turn it over then pulled the plugs? if they aren't wet with fuel then i'd bet your fuel lines are misdirected. in that case... swap the bottom two on the drivers side (in the set of three) and MAKE SURE you have good clips on there.

more info will get more help; did you pull the engine?
Reply
Old Jan 10, 2006 | 10:52 PM
  #5  
FD3RotorTurbo's Avatar
Thread Starter
FD3Rotor
iTrader: (1)
 
Joined: May 2003
Posts: 418
Likes: 1
From: Utah
Yeah, i pulled then engine. i took everything out of the engine bay. i completely striped my car to repaint it. the engine hasnt ran since feb 19th of 05. i think the fuel are correct cuz i marked them before i took the engine out. but i will take a look just to make sure.
Reply
Old Jan 11, 2006 | 02:33 AM
  #6  
weetbix13's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 423
Likes: 0
From: New Zealand
repaint is much further than i went... but i'd check your grounds too.
if you know you have spark... odds on everything is fine... before you do those fuel lines, you may as well check the spark plugs for fuel first - might save you wasting some time.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
Apr 13, 2019 09:24 AM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
torky007
3rd Generation Specific (1993-2002)
7
Aug 17, 2015 05:14 PM
ashleymiche
Introduce yourself
0
Aug 14, 2015 12:59 PM




All times are GMT -5. The time now is 08:38 AM.