3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

car wont start

Thread Tools
 
Search this Thread
 
Old 08-20-05, 01:53 PM
  #1  
Senior Member

Thread Starter
 
DGnizer's Avatar
 
Join Date: Apr 2004
Location: West Palm Beach, FL
Posts: 611
Likes: 0
Received 0 Likes on 0 Posts
car wont start

ok I change the injectors to 850 pri and 1550 sec. the car haven't been tuned yet . Its been in my garage since I intalled it. I started it a few times and it runs rich and idles bad. today my cousin came by and I show him the car. It started fine and I rev it to 4500. white smoke was coming out when i stepped on the gas and black smoke as usual for when foot of the pedal. I kill the car then as i was about to close the hood I realized that the fule pump was still grounded. OMG its been grounded for 3 days now. so I yank it off and try to start the car then now the car won't start. I put the ground back on to see if it changes anything but nothing. what do you think happened? the only thing that i did different since install the injectors is stepped on the gas. Did I flood the car? any help will be appreciated. thanks
Old 08-20-05, 03:21 PM
  #2  
Senior Member

Thread Starter
 
DGnizer's Avatar
 
Join Date: Apr 2004
Location: West Palm Beach, FL
Posts: 611
Likes: 0
Received 0 Likes on 0 Posts
fixed it ! it was flooded and the plugs were fouled. cleaned it up and walked the crank a few times. now she runs better bu t still not optimum. I still need to get here tuned. thanks
Old 08-21-05, 12:55 AM
  #3  
Rotary Enthusiast

 
cmartinp28's Avatar
 
Join Date: Apr 2002
Location: union, nj
Posts: 1,327
Likes: 0
Received 1 Like on 1 Post
you are dumping 40% more fuel into your car than normal...... of course your car will have a hard time starting
Old 08-21-05, 01:11 AM
  #4  
Senior Member

Thread Starter
 
DGnizer's Avatar
 
Join Date: Apr 2004
Location: West Palm Beach, FL
Posts: 611
Likes: 0
Received 0 Likes on 0 Posts
yah i know. figured that out after pulling the plugs out. now if you can point me to a good tuner that does PFC here in south FL now that would be really helpful.

Last edited by DGnizer; 08-21-05 at 01:16 AM.
Old 08-21-05, 01:19 AM
  #5  
Rotary Enthusiast

 
cmartinp28's Avatar
 
Join Date: Apr 2002
Location: union, nj
Posts: 1,327
Likes: 0
Received 1 Like on 1 Post
find someone with a datalogit, and change the injector sizing

you should be able to drive your car then, til you find someone to tune the car ofcourse
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
gtcd
1st Generation Specific (1979-1985)
30
08-19-15 02:44 AM
torky007
3rd Generation Specific (1993-2002)
7
08-17-15 05:14 PM
ashleymiche
Introduce yourself
0
08-14-15 12:59 PM



Quick Reply: car wont start



All times are GMT -5. The time now is 12:31 PM.