Cant find the coolant drain plug on the block
10-8-10-8
Joined: Jan 2012
Posts: 848
Likes: 12
From: Australia
You shouldnt need to remove the plastic guard cover.
*(The following may not apply to you-my car is Right Hand Drive)*
I was able to simply reach down from the top of the engine without removing anything, and crack open the drain with a spanner.
Consequently, if you were to lie under the car, you could crack it by reaching up.
I wouldn't recommend going through the hassle of removing the plastic inner guard cover unless that is the only way on a Left Hand Drive car?
*(The following may not apply to you-my car is Right Hand Drive)*
I was able to simply reach down from the top of the engine without removing anything, and crack open the drain with a spanner.
Consequently, if you were to lie under the car, you could crack it by reaching up.
I wouldn't recommend going through the hassle of removing the plastic inner guard cover unless that is the only way on a Left Hand Drive car?
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
