Can't find Blitz FMIC / Apexi Intake combo pics...is this possible?
02-27-03, 07:39 AM
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
Can't find Blitz FMIC / Apexi Intake combo pics...is this possible?
Yes, have searched and only found one pic but really can't see in the engine bay to see what intakes are being run. I am in the middle of deciding which FMIC to go with and don't want to change my intakes cuz I like them (Apexi). I noticed that the greddy 2 row can be run with them but the apexi intakes need the pipes from the Apexi FMIC kit to fit with the greddy. Just want to know if the Blitz fmic will fit with my Apexis.
02-27-03, 12:48 PM
#2
Eats, Sleeps, Dreams Rotary
Thread Starter
Ok...so I kinda almost have two threads going that have teh sme thing going on...here's the other one...
https://www.rx7club.com/forum/showth...98#post1534798
https://www.rx7club.com/forum/showth...98#post1534798
02-27-03, 01:10 PM
#3
I ran the Apex'i Intakes with the Blitz FMIC and had no problems. You can't use the brackets that come with the intakes though. The bracket that hold them together has to come off as well as the ones that secure the intake to that body crossmember will have to get moved but nothing too much. I bolted the top intake to the fender wall and used zip ties to hold them together so that they didn't flop around in there. It worked fine for me.
02-27-03, 01:13 PM
#4
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally posted by lane_change
I ran the Apex'i Intakes with the Blitz FMIC and had no problems. You can't use the brackets that come with the intakes though. The bracket that hold them together has to come off as well as the ones that secure the intake to that body crossmember will have to get moved but nothing too much. I bolted the top intake to the fender wall and used zip ties to hold them together so that they didn't flop around in there. It worked fine for me.
I ran the Apex'i Intakes with the Blitz FMIC and had no problems. You can't use the brackets that come with the intakes though. The bracket that hold them together has to come off as well as the ones that secure the intake to that body crossmember will have to get moved but nothing too much. I bolted the top intake to the fender wall and used zip ties to hold them together so that they didn't flop around in there. It worked fine for me.
https://www.rx7club.com/forum/showth...8&goto=newpost
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM