Can you help me Identify these parts?
#1
Full Member
Thread Starter
Join Date: Jun 2005
Location: Lafayette, La
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Can you help me Identify these parts?
I need to replace them, but I have no idea what they are.
When the engine was pulled. The oil lines to the oil cooler were cut, is there any replacement for these lines and possibly another oil cooler.
And is there a replacement for this torn boot or do I have to replace the entire column?
I really appreciate the help.
Thanks a lot.
.a
When the engine was pulled. The oil lines to the oil cooler were cut, is there any replacement for these lines and possibly another oil cooler.
And is there a replacement for this torn boot or do I have to replace the entire column?
I really appreciate the help.
Thanks a lot.
.a
#3
Urban Combat Vet
iTrader: (16)
Never had to replace any oil lines, but since they disconnect with the removal of a 'D' ring, I'd hope you can buy just the halves you need.
As for the other, I think they call that the intermediate shaft boot. You should still be able to buy a replacement. But clean the joint up and inspect carefully for any play or looseness. Looks like it's been torn for a while.
As for the other, I think they call that the intermediate shaft boot. You should still be able to buy a replacement. But clean the joint up and inspect carefully for any play or looseness. Looks like it's been torn for a while.
#4
Rotary Enthusiast
Who would cut the stock oil cooler lines to remove the engine? Probably takes longer to cut the lines then it does to remove the C-clip and do it properly.
Ray will take care of you.
=Ben
Ray will take care of you.
=Ben
Thread
Thread Starter
Forum
Replies
Last Post
driftfcbuckey
The Bad & Fugly Members
10
12-02-15 05:48 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM