Can anyone ID this hose?
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Navarre, FL
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone ID this hose?
Greetings,
I posted this in another thread, but got no response, so I thought I'd try it here. I found this hose loose where it attaches to the plastic elbow at the inlet of the primary turbo. In fact, it attaches to a plastic pipe, that was glued into the elbow, and now the glue has turned loose. I can fix it, but I'm curious where the hose goes, and what it does. Anyone know?
https://www.rx7club.com/forum/attach...postid=1101855
Thanks,
I posted this in another thread, but got no response, so I thought I'd try it here. I found this hose loose where it attaches to the plastic elbow at the inlet of the primary turbo. In fact, it attaches to a plastic pipe, that was glued into the elbow, and now the glue has turned loose. I can fix it, but I'm curious where the hose goes, and what it does. Anyone know?
https://www.rx7club.com/forum/attach...postid=1101855
Thanks,
#2
Senior Member
iTrader: (1)
Join Date: Feb 2001
Location: Charleston, WV
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
one goes to the green manifold where the pc and wg solenoids, oil metering vac lines, etc attach. The other is a low pressure oil line that comes from the side of the filler neck.
#4
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Navarre, FL
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
Never mind. I just answered my own question. The one I marked should be the one that goes to the oil filler neck, so it can't be causing me too much grief.
Thanks again,
Thanks again,