Can the 99spec Wing be mounted easily on older models?
#1
Aussie Rx7 Freak
Thread Starter
Join Date: Nov 2002
Location: Adelaide, Australia
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
Can the 99spec Wing be mounted easily on older models?
Hi guys,
Firstly, It's been a long time since I've last been here. I've just bought my FD - see here:
https://www.rx7club.com/showpost.php...postcount=5394
Anyway, I searched and I couldn't find the answer. I want to get rid of the blade spoiler I have and install the 99spec adjustable one.
Firstly, can this be done(and done well), and secondly how hard is it to do?
Apart from that I just want to make my Series 7 get the series 8 touches - especially the white face gauges - front bar, and other stuff like clear indicators, the circle taillights etc
Here is the wing I'm talking about.
Firstly, It's been a long time since I've last been here. I've just bought my FD - see here:
https://www.rx7club.com/showpost.php...postcount=5394
Anyway, I searched and I couldn't find the answer. I want to get rid of the blade spoiler I have and install the 99spec adjustable one.
Firstly, can this be done(and done well), and secondly how hard is it to do?
Apart from that I just want to make my Series 7 get the series 8 touches - especially the white face gauges - front bar, and other stuff like clear indicators, the circle taillights etc
Here is the wing I'm talking about.
#2
Senior Member
iTrader: (3)
Join Date: May 2006
Location: Hamilton, Ontario
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
most of those things can be easily done to the series 6/7 rx-7's. the only one i heard can give you problems is hooking up the new gauges
edit: here's a link i found a while ago about installing a '99 spec wing.
http://www.negative-camber.org/crispyrx7/99wing.htm
edit: here's a link i found a while ago about installing a '99 spec wing.
http://www.negative-camber.org/crispyrx7/99wing.htm
#4
Senior Member
iTrader: (3)
Join Date: May 2006
Location: Hamilton, Ontario
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
well this is what i've heard (so you make want to double check it) but apparently the part the makes it difficult is the 99 gauges have a boost gauge where as the series 6 (and im guessing 7) have an oil pressure gauge. thats what makes it difficult to swap.
#5
Aussie Rx7 Freak
Thread Starter
Join Date: Nov 2002
Location: Adelaide, Australia
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
Yes you are correct. I'm just hoping there is away around this. I'll have to think about that one.
Thanks for the spoiler link -exactly what I wanted to know
Thanks for the spoiler link -exactly what I wanted to know
#6
Rotary Enthusiast
Join Date: May 2005
Location: Okayama - Japan
Posts: 986
Likes: 0
Received 0 Likes
on
0 Posts
dont change the gauges mate, personally i think if your ever going to sell it then it might be difficult to sell with gauges that have been changed. I personally would assume falsified kms when i see new gauges. So many nicer mods to do mate. I actually prefer the black ones anyway, the white is a bit bright.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM