Cable Identification HELP!
#1
Junior Member
Thread Starter
Cable Identification HELP!
I need some assitance in identifying the following cables. I have just installed a freashly overhauled engine
.
Do not know the termination of the lead from the main fuse box. 120A lead closest to the fender (Dual Black & White).
The other wire is black yellow. I am confident it is ground just unclear where to terminate (2 positions on the same lead.
The car is a JDM and the wiring color codes are different from my schematics. I had run these wires as grounds. Blew the 120A main fuse.
Car still cranks and healights work. Need some guidance. HELP!
.
Do not know the termination of the lead from the main fuse box. 120A lead closest to the fender (Dual Black & White).
The other wire is black yellow. I am confident it is ground just unclear where to terminate (2 positions on the same lead.
The car is a JDM and the wiring color codes are different from my schematics. I had run these wires as grounds. Blew the 120A main fuse.
Car still cranks and healights work. Need some guidance. HELP!
#4
Junior Member
Thread Starter
Found the position of the double wire from the 120A main fuse box (X-01). - Goes to the relay and fuse box (X-02).
Now for the positions of what I think are ground cables. Any Asistance?
Now for the positions of what I think are ground cables. Any Asistance?
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic MTX-L to adaptronic question
TeamRuffRacing
Adaptronic Engine Mgmt - AUS
1
09-30-15 08:13 PM