Burn out FD, ? about it's fuel system!
#1
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2002
Location: FL
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
Burn out FD, ? about it's fuel system!
I need to figure out what i want to do for fuel,i have the 850/1600 inject, and aftermarket FPR, and i was wondering if any of you guys know what the burn out FD is using. i haven't seen anything like it. Look at the pics.
I see the fuel cell on top, but what's the cylinder part that goes to maybe 2 external pumps.
Any idea what pumps they are that can run like that. I thought most high flowing pumps were gravity feed.
I want something that can handle up to 600hp.
I plan on using boost a pump, and methanol AI also.
http://jm-imports.co.uk/cardetails/maxda/rx716.html
I see the fuel cell on top, but what's the cylinder part that goes to maybe 2 external pumps.
Any idea what pumps they are that can run like that. I thought most high flowing pumps were gravity feed.
I want something that can handle up to 600hp.
I plan on using boost a pump, and methanol AI also.
http://jm-imports.co.uk/cardetails/maxda/rx716.html
#3
SINFUL7
iTrader: (37)
1. The Big Square box is not a fuel cell, that is the Battery box.
2. The Big cylinder is a sump tank that is probably fed by a pump in the fuel tank, you have this so you don't get fuel starvation due to hard corners.
3. The 2 pumps that look like Bosch 044 pumps are the pumps that feed the rail of the sump tank.
This setup should easily handle over 600hp
2. The Big cylinder is a sump tank that is probably fed by a pump in the fuel tank, you have this so you don't get fuel starvation due to hard corners.
3. The 2 pumps that look like Bosch 044 pumps are the pumps that feed the rail of the sump tank.
This setup should easily handle over 600hp
#4
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2002
Location: FL
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, anybody know where i can get a sumped tank like that? When running pumps like that do you have to run additional fuel filters? I know when they are in the tank they have sock on them for filteration.
Do you think a one bosh 044 or one supra pump with a boost a pump be enough for 600Hp ?
By the way the burn out car is forsale, i wish i could afford it.
Do you think a one bosh 044 or one supra pump with a boost a pump be enough for 600Hp ?
By the way the burn out car is forsale, i wish i could afford it.
#5
SINFUL7
iTrader: (37)
You wil have to run additional fuel filters, I believe you need a 6micron.
Also you will need 2 pumps if you want to reach 600hp safely unless you run one big external pump.
You can either have a tank made or just go online and search for companies that sell it...there is a lot of them that do.
Also you will need 2 pumps if you want to reach 600hp safely unless you run one big external pump.
You can either have a tank made or just go online and search for companies that sell it...there is a lot of them that do.
#6
F'n Newbie...
iTrader: (6)
Check www.summitracing.com for the fuel cells... Summit has EXCELLENT customer service and really fast shipping. I'd go with them for anything not rotary specific..
Thread
Thread Starter
Forum
Replies
Last Post
Snook
3rd Generation Specific (1993-2002)
21
09-01-15 06:32 PM
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM