I fixed my problem. I posted above that I had a bouncy idle as well, and mine was caused by a faulty LIM gasket. I changed that and it ran perfectly. I also disabled my wax rod assembly while I was at it.

However, after I installed my Greddy FMIC, the bouncy idle happened again. Once I reset my PFC, it ran fine again. So maybe he just needs to reset his PFC and retune it or so.

 

My idle bounces too, but only when i depress the clutch and put the transmission in gear (any gear, 1 - 5 or reverse). Put the tranny in neutral, it idles very smooth at around 800 rpm. Any ideas?

 

Don't know Mike....my problem turned out to be related to the PFC...

best,
c