jeremyb

I'm looking to buy some secondary injectors and have them at 1600cc's. I was looking at rx7store.net and their bosch ones are 99.00? And these NIPPONDENSO ones are 330.00? Are BOSCH injectors bad or something? I'm not one to call a cheap person... but... when there is a $230 difference... reasearch must be done. So is it worthy to get BOSCH?

Jason

iTrader: (5)

The big difference is the 1300cc's will drop in the stock fuel rail and the 1600's require an aftermarket rail with a few other parts. In the end you will endup spending alot more to get the 1600's to work

Jason

jeremyb

Well the thing is that im slowly converting to single turbo... So im planning to buy an aftermarket ECU along with AM fuelrail, lines, and primary injectors also. So fuel was kinda the first thing to start off with since i know i can put them after i get my ecu.... i was planning on having 550cc pri. and 1600cc sec. If you can think of a better combo please input because any help i get will really be useful.

jeremyb

bump =/