3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

boost problems help !!!

Thread Tools
 
Search this Thread
 
Old Oct 27, 2002 | 12:01 PM
  #1  
njm's Avatar
njm
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 15
Likes: 0
From: alabama
boost problems help !!!

please help. i have a sudden boost problem . i can not get the car to pull more than 6.5 lbs of boost . no mods have been done recently. the only new thing that i have done is replace the springs and shocks about a month or so ago . it is riding stiffer , could something have jarred loose? this is very concerning since this has never been a problem before . all help is greatly apprieciated .
Reply
Old Oct 27, 2002 | 12:06 PM
  #2  
ttb's Avatar
ttb
No Cup Holder Racing
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 1,446
Likes: 0
From: Bay Area
are you hearing a whoosing noise?
Reply
Old Oct 27, 2002 | 12:12 PM
  #3  
njm's Avatar
njm
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 15
Likes: 0
From: alabama
boost problem

i am hearing more air sounds under the hood.
Reply
Old Oct 27, 2002 | 01:19 PM
  #4  
nmo93's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 246
Likes: 0
From: south jersey
did you check the rubber coupler coming off the turbos. it is known to crack. i would check that first, then the intake hoses for cracks in them. after that check all intercooler hoses. nick
Reply
Old Oct 27, 2002 | 01:34 PM
  #5  
Kahren's Avatar
i am not a girl
Tenured Member: 20 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 1,916
Likes: 0
From: CT
intake hoses would not cause to have less boost
Reply
Old Oct 28, 2002 | 01:12 PM
  #6  
sk8world's Avatar
Chasing numbers
Tenured Member 20 Years
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Maybe try washing your car! HAHAAH Jason, oh I mean "njm". Did you check lines listed above? Why not just replace all lines while you have the UIM off? Might be quicker then hunting around for several hours.. Did you pull codes yet?
When all this started were you on high boost or right before that? Also waht about the stuff you used to help seel the lines, could some of that have gotten ina line and clogged it??
Reply
Old Oct 29, 2002 | 01:31 PM
  #7  
sk8world's Avatar
Chasing numbers
Tenured Member 20 Years
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
anyone else have some support?
Reply
Old Oct 30, 2002 | 12:59 PM
  #8  
sk8world's Avatar
Chasing numbers
Tenured Member 20 Years
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
bump
Reply
Old Oct 30, 2002 | 07:49 PM
  #9  
njm's Avatar
njm
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 15
Likes: 0
From: alabama
please help !!! i can not seem to find any loose lines or cracked hoses . the car does not pull more than 7lbs boost. it idles fine. i have had some problems with the car dying out when i depress the clutch . could this be at all related ?? also , the last mod was shocks and springs. i must have pulled on the wires feeding the anti- lock brakes because the light is on in the dash . is this related ??? please somebody help . this is very frustrating . thanks
Reply
Old Oct 31, 2002 | 09:03 AM
  #10  
njm's Avatar
njm
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 15
Likes: 0
From: alabama
bump . please help . thanks
Reply
Old Oct 31, 2002 | 12:31 PM
  #11  
sk8world's Avatar
Chasing numbers
Tenured Member 20 Years
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Jason, I am going to post this on the rx7 digest. Email me so I can foward repleys to you.
Reply
Old Oct 31, 2002 | 12:56 PM
  #12  
Rayman93RX7's Avatar
R.B. technologies
Tenured Member 15 Years
iTrader: (4)
 
Joined: Oct 2002
Posts: 673
Likes: 0
From: south coast MA
Can you be more clear about where the extra air is coming from? Can you open the hood, rev the engine at least to like 3krpm and hear where the leak is?
Reply
Old Nov 1, 2002 | 10:38 AM
  #13  
njm's Avatar
njm
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 15
Likes: 0
From: alabama
bump
Reply
Old Nov 1, 2002 | 11:18 AM
  #14  
Kahren's Avatar
i am not a girl
Tenured Member: 20 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 1,916
Likes: 0
From: CT
if all the vacuum liens are fine then check to see if u have pills on the vastegate acutor and prespool actuator. if u do then your wategate and precontrol solenoids are bad. note some cars like MINE didnt come iwtht the pills in the lines, they were built in the nipples that those hoses attach to.
Reply
Old Nov 1, 2002 | 11:52 PM
  #15  
sk8world's Avatar
Chasing numbers
Tenured Member 20 Years
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
to the top
Reply
Old Nov 2, 2002 | 11:25 AM
  #16  
njm's Avatar
njm
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 15
Likes: 0
From: alabama
i do have pills in the lines. i replaced all the hoses and i know for sure they are there. can you test the wastgate or selonoids to see if they are working properly?the car has 25k miles on it and it would suprise me if something major is causing this problem . thanks
Reply
Old Nov 2, 2002 | 06:05 PM
  #17  
rpm_pwr's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 348
Likes: 1
From: Brisvegas, Aust
are you getting 7psi on both turbos? If so it sounds to me like you're wastegate. Pull the strut bar, xover pipe, and pressure chamber off. Pull the hoses off the wastegate solenoid (very carefully). If you blow into the one that goes to the actuator it should feel blocked. If you pull the hose off back of the y- pipe, you can check that too.

-pete
Reply
Old Nov 2, 2002 | 07:43 PM
  #18  
njm's Avatar
njm
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 15
Likes: 0
From: alabama
i will check the wastgate actuator and see if that is the problem . thanks
Reply
Old Nov 2, 2002 | 07:49 PM
  #19  
sk8world's Avatar
Chasing numbers
Tenured Member 20 Years
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Jason, If you think your car will be fixed by this weekend I think we can fit you in. we have had 2-3 guys drop out.
Reply
Old Nov 2, 2002 | 08:37 PM
  #20  
duboisr's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 2,171
Likes: 1
From: Nashville Tn
Did you check the wastegate solenoid, by the test method in the factory manual, or just looked to see if the hoses were on?
Reply
Old Nov 3, 2002 | 09:15 AM
  #21  
njm's Avatar
njm
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 15
Likes: 0
From: alabama
bump
Reply
Old Nov 4, 2002 | 09:59 AM
  #22  
njm's Avatar
njm
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 15
Likes: 0
From: alabama
bump
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
AXA
Single Turbo RX-7's
8
Sep 5, 2015 10:06 AM
gabescanlon
3rd Generation Specific (1993-2002)
7
Sep 5, 2015 12:09 AM
tiger18
3rd Generation Specific (1993-2002)
9
Sep 3, 2015 08:27 PM




All times are GMT -5. The time now is 06:10 AM.