3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Boost problems

Thread Tools
 
Search this Thread
 
Old Mar 12, 2005 | 10:56 AM
  #1  
dlblackrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 22
Likes: 0
From: Roseburg
Boost problems

Hey guys i was wondering if someone can help me. I just bought a boost gauge and tried the boost test where in third at wot at 2500rpm you are supposed to be at around 10 psi but i am only at 5psi but when when i hit 4200 it shoots up to 10 psi then back down to 8 like it is suposed to so i dont know what the hell is going on. I am also idling a little high like around 1000 rpm, not sure if that is related. if anyone can help out, thanks
Reply
Old Mar 12, 2005 | 04:20 PM
  #2  
WaLieN's Avatar
Call me gramps!
Tenured Member: 20 Years
 
Joined: Jul 2003
Posts: 2,334
Likes: 0
From: Detroit, MI
Originally Posted by dlblackrx7
Hey guys i was wondering if someone can help me. I just bought a boost gauge and tried the boost test where in third at wot at 2500rpm you are supposed to be at around 10 psi but i am only at 5psi but when when i hit 4200 it shoots up to 10 psi then back down to 8 like it is suposed to so i dont know what the hell is going on. I am also idling a little high like around 1000 rpm, not sure if that is related. if anyone can help out, thanks
You are not supposed to make 10psi at 2,500RPM, you are supposed to make 10psi at 3,000RPM. Try the test again, and see what you make at 3,000RPM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
AXA
Single Turbo RX-7's
8
Sep 5, 2015 10:06 AM
gabescanlon
3rd Generation Specific (1993-2002)
7
Sep 5, 2015 12:09 AM
tiger18
3rd Generation Specific (1993-2002)
9
Sep 3, 2015 08:27 PM




All times are GMT -5. The time now is 06:12 AM.