Boost problem through transition!!??!?
Thread Starter
Senior Member
Joined: Jul 2001
Posts: 596
Likes: 0
From: Columbus, Ohio
Boost problem through transition!!??!?
okay, let's see if anyone can help me here....
I'm getting low boost through the transition, 8psi as opposed to 12psi....
Here are symptons that I can relate to this.....
My primary turbo spools slowly, about full at 3400rpm?
Sometimes the primary doesn't get to 12 psi, but the transition is always 8?
When I "get on it" at a lower rpm I sometimes get a BIG hesitation?
Could any of these be a possible symptom of a problem? I've checked most of the connections and vacuum lines and I don't know what else to look at. What happens between the turbos that could cause a problem?
I'm getting low boost through the transition, 8psi as opposed to 12psi....
Here are symptons that I can relate to this.....
My primary turbo spools slowly, about full at 3400rpm?
Sometimes the primary doesn't get to 12 psi, but the transition is always 8?
When I "get on it" at a lower rpm I sometimes get a BIG hesitation?
Could any of these be a possible symptom of a problem? I've checked most of the connections and vacuum lines and I don't know what else to look at. What happens between the turbos that could cause a problem?
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
Adaptronic Cranking fuel table messed up?
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
AXA
Single Turbo RX-7's
8
Sep 5, 2015 10:06 AM
tiger18
3rd Generation Specific (1993-2002)
9
Sep 3, 2015 08:27 PM