boost controllers? how do they work on the SEQ. setup
09-18-02, 12:36 AM
#1
i am not a girl
Thread Starter
iTrader: (13)
Join Date: Aug 2001
Location: CT
Posts: 1,916
Likes: 0
Received 0 Likes
on
0 Posts
boost controllers? how do they work on the SEQ. setup
i was wonderign how the aftermarket boost controllers control the boost and the prespool of the secondary turbine. do they have 2 valves that do the job or do u have to switch to the non seq setup. please enlighten me
09-18-02, 12:55 AM
#2
according to the instructions for the Apexi AVC-R, one solenoid controls the prespool and wastegate operation. then you just adjust duty cycle at 4500rpm to reduce boost spike.
I hooked mine up to just the wastegate and use a home depot valve to fine tune the prespool. IMO it works better this way and is easier to tune.
I hooked mine up to just the wastegate and use a home depot valve to fine tune the prespool. IMO it works better this way and is easier to tune.
09-18-02, 02:14 AM
#4
1JZ powered
Join Date: Jul 2001
Location: Where there's only two seasons, hot and wet! I love Okinawa
Posts: 4,423
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ISUposs
according to the instructions for the Apexi AVC-R, one solenoid controls the prespool and wastegate operation. then you just adjust duty cycle at 4500rpm to reduce boost spike.
I hooked mine up to just the wastegate and use a home depot valve to fine tune the prespool. IMO it works better this way and is easier to tune.
according to the instructions for the Apexi AVC-R, one solenoid controls the prespool and wastegate operation. then you just adjust duty cycle at 4500rpm to reduce boost spike.
I hooked mine up to just the wastegate and use a home depot valve to fine tune the prespool. IMO it works better this way and is easier to tune.
BTW, your avatar's HOT!
09-18-02, 02:46 AM
#5
Full Member
Join Date: Mar 2001
Location: TULSA, OK
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
i think the avc-r 1st gen you can mess with the boost curve, so that the spike can be taken out of the curve. Or you can induce a little spike to help turbo spool up a little faster...
Thread
Thread Starter
Forum
Replies
Last Post