Blitz SBCID users for Sequentials?
Thread Starter
Senior Member
Joined: Jan 2002
Posts: 401
Likes: 0
From: canada
Blitz SBCID users for Sequentials?
Hi Blitz users...
How do you guys like this boost controller for our factory sequentials?
When installing... do you just plumb unto the Wastegate line? Or do you have to plumb into the
pre-control line as well?
jc/
How do you guys like this boost controller for our factory sequentials?
When installing... do you just plumb unto the Wastegate line? Or do you have to plumb into the
pre-control line as well?
jc/
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,283
Likes: 4
From: ATL, GA U.S.
You can only connect it to the wg line. There are no boost controllers with provisions for sequential turbo setup. The first turbo always stay around 10 lb, the second turbo will come one and hit what ever you set the boost level to. If you want the first turbo to come on higher, you'll need to install a manual valve to control the prespool.
Thread
Thread Starter
Forum
Replies
Last Post