Here's the situation. Last week I had a blitz sbc-id installed and it was set for 12psi on channel one. I drove it home in the rain and never really got on it. Today I pulled it out (finally dry out!) and it 15.1 then later 16.2. After hitting 16.2 I can no longer build a single, not 1 psi of boost. I found a hose had popped off the blitz solenoid, drove it, but that wasn't the problem. I checked the FMIC couplers and they are fine.

The SBC-id is set to Auto, with gain at 10, and channel 1 is 12 psi. Any ideas would be great.

 

OneBadRX7 was able to help me figure it out. Apparently Auto mode sucks *** and is very not accurate. When I had set it to manual mode, I guess I didn't see it was only set to 10%. We set it to 40% and now I'm getting 12psi with no spikes. Thanks Steve

Bryan

 

Sure thing!!! Cars running really nice man. Oh I saw your post about your radiator, you should sell it to me dirt cheap and I will get it fixed, hook a brotha up!!