before i make the purchase
#1
Full Member
Thread Starter
Join Date: Nov 2003
Location: Bethesda, MD
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
before i make the purchase
What do you guys think of a used Pettit Unlimited ECU for this setup:
93 base model, downpipe, catback, m2 cold air intake
Aside from letting me handle the 13-14psi of boost I'm experiencing, what else should I expect from this ECU?
Thanks
93 base model, downpipe, catback, m2 cold air intake
Aside from letting me handle the 13-14psi of boost I'm experiencing, what else should I expect from this ECU?
Thanks
#2
Tony Stewart Killer.
iTrader: (12)
its a great ecu
I ran the pettit unlimited with
pettit streetported motor, intake, dp, mp, cb, fuel pump, non sequential @12 psi with no problems
it cant handle 13-14psi safely the stock injectors will be near maxed out at 14psi
you need to lower the boost with a controller to run 12psi max with that ecu
careful dont boost above 10psi until you get that ecu...blown motors suck and it will happen at that boost
the powerfc is really cool but it requires tuning with every change in mods...the pettit is like get in and go
I ran the pettit unlimited with
pettit streetported motor, intake, dp, mp, cb, fuel pump, non sequential @12 psi with no problems
it cant handle 13-14psi safely the stock injectors will be near maxed out at 14psi
you need to lower the boost with a controller to run 12psi max with that ecu
careful dont boost above 10psi until you get that ecu...blown motors suck and it will happen at that boost
the powerfc is really cool but it requires tuning with every change in mods...the pettit is like get in and go
#4
I need more black paint..
iTrader: (3)
Join Date: Dec 2001
Location: Redlands CA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
You might want to get an intercooler when you go above 12 psi, from what most people have said that is about the effective max of the stock ic. Just food for thought, blown motors are no fun.
Thread
Thread Starter
Forum
Replies
Last Post