Bailey Dump Valve
#1
Newbie
Thread Starter
Join Date: Jun 2004
Location: Edinburgh
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Bailey Dump Valve
Hi, I just got an FD3S it has a bailey dump valve fitted but only to one of the turbo's. The other turbo has the standard recirculating dump valve. Are both waste pipes supposed to go into a Y juction and then a single dump valve or is it supposed to have 2 dump valves.
I am assuming that one dump valve on one turbo is wrong ?
I am assuming that one dump valve on one turbo is wrong ?
#2
Mr. Links
iTrader: (1)
There are two turbos, but only one ABV (Air Bypass Valve also known as BOV or Dump Valve).
The other valve is the CRV (Charge Relief Valve). While it is similar to the stock ABV, it's function is not the same. Here is a good overview of the stock RX-7 sequential system:
http://www.autosportracetech.com/RX-...erOverview.htm
The other valve is the CRV (Charge Relief Valve). While it is similar to the stock ABV, it's function is not the same. Here is a good overview of the stock RX-7 sequential system:
http://www.autosportracetech.com/RX-...erOverview.htm
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
8
10-02-15 08:08 AM