apexi power intake install for dummies
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: home of the big chrome wheel homies
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
apexi power intake install for dummies
Could someone do me a big favor and type a simple write-up of how to install the apexi power intake system or direct me to a how-to site that could tell me exactly how to do the install? I just know I'll screw something up if I try the install without any instructions and heck I don't even know if the kit I ordered comes with instructions. I would really appreciate any form of imput. Thank you SOOOOOO much!!
#2
Senior Member
Join Date: May 2001
Location: Marietta, Ga, USA
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Just got through installing mine and yes there are instructions but no I don't read japanese . What ya gotta do is fist of all take out the stock air box...it is pretty straight forward...3bolts I think and then take off all the piping. Next you probably want to put the seal between the housing and the filter and put the brackets on (not too tight though for they will need to be moved around). Next you want to put that restrictor thing in the hose indicated by the diagram. Then you just hook up all the hoses, bolt the brackets into their respected locations, and tighten everything. That should do it...if you have problems email me at striker_2453@hotmail.com or pm me.
#3
Full Member
Thread Starter
Join Date: Mar 2001
Location: home of the big chrome wheel homies
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Ok. Sounds good. I didn't think it could be too much more than connecting some hoses and tightening brackets. I watched an intake get put on my old talon, but that was more than 2 years ago and it was a non-turbo. Thanks rx7eaven! Hopefully the kit will come soon because I'm chomping at the bit to hear these suckers in action!
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM