Anone have any good link or pointers on installing it, the only thing i dont understand is the three wires that are coming out of the harnedd, that aren't shown to go anywhere?

 

u mean 3 wires out of the timer? the harness only has one extra white connector that u don't need to connect to anything. on the timer, the white wire goes to the o2 sensor, the grey wire to the parking brake, the black wire to the ecu ground... i think... it's been a while so i'm not 100% positive but i think that's how it goes. and i STILL have no idea how to use the auto timer function, heh.

 

Well i got everything installed correctly but the O2 readout is sayin like 2.4, is that right? Or do i have a bad 02 sensor

 

that doesn't sound right... you might have hooked it up wrong or your o2 sensor is bad. at idle I get readings around 0.06 - 0.09 and they seem reasonable. I get similar, but not the exact same readings from my pfc comander. you'd think a'pexi's products would be consistent but they aren't...

 

maybe i tapped into the wrong wire
3c? Right? mine ended up bein white