- - APexi Auto Timer Install
(https://www.rx7club.com/3rd-generation-specific-1993-2002-16/apexi-auto-timer-install-33817/)
ejmack1
11-20-01 11:21 PM
APexi Auto Timer Install
Anone have any good link or pointers on installing it, the only thing i dont understand is the three wires that are coming out of the harnedd, that aren't shown to go anywhere?
potatobbq
11-20-01 11:52 PM
Re: APexi Auto Timer Install
Originally posted by ejmack1
[B]Anone have any good link or pointers on installing it, the only thing i dont understand is the three wires that are coming out of the harnedd, that aren't shown to go anywhere? [/]
u mean 3 wires out of the timer? the harness only has one extra white connector that u don't need to connect to anything. on the timer, the white wire goes to the o2 sensor, the grey wire to the parking brake, the black wire to the ecu ground... i think... it's been a while so i'm not 100% positive but i think that's how it goes. and i STILL have no idea how to use the auto timer function, heh.
ejmack1
11-21-01 11:51 AM
Well i got everything installed correctly but the O2 readout is sayin like 2.4, is that right? Or do i have a bad 02 sensor
potatobbq
11-21-01 03:58 PM
Originally posted by ejmack1 Well i got everything installed correctly but the O2 readout is sayin like 2.4, is that right? Or do i have a bad 02 sensor
that doesn't sound right... you might have hooked it up wrong or your o2 sensor is bad. at idle I get readings around 0.06 - 0.09 and they seem reasonable. I get similar, but not the exact same readings from my pfc comander. you'd think a'pexi's products would be consistent but they aren't...
ejmack1
11-21-01 04:25 PM
maybe i tapped into the wrong wire
3c? Right? mine ended up bein white
